US Fastener Sources

The Right Source

Members: Registration | Login


Estes Express

Register with the Estes Express Freight Program, today!

Register NOW!


US Fastener Sources
US Fastener Sources
US Fastener Sources

Fastener Standards

Fastener Standards come to play every day in the fastener industry without exception. Standards provide information to establish quality fasteners, dimensional standards and testing for performance of the fastener and in the fastening applications. We have represented the three major fastener standards organizations in the United States with ASTM, SAE and ANSI. Further questions and comments should be directed towards the Standards Organization and request a copy of the standard you are concerned.

ASTM-A31
Specification for Steel Rivets and Bars for Rivets, Pressure Vessels

ASTM-A36
Specification for Carbon Structural Steel A-153 Specification for Zinc Coating (Hot-Dip) on Iron and steel Hardware

ASTM-A193
Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service

ASTM-A194
Specification for Carbon and Alloy Steel Nut for Bolts for High-Pressure and High-Temperature Service

ASTM-A307
Specification for Steel Bolts and Studs, 60,000 PSI Tensile Strength

ASTM-A320
Specification for Alloy Steel Bolting Materials for Low-Temperature Service

ASTM-A325
(Changed to ASTM F3125) - Specification for Structural Bolts, Steel, Heat Treated, 120/105 KSI Minimum Tensile Strength

ASTM-A354
Specification for Quenched and Tempered Alloy Steel Bolts, Studs and Other Externally Threaded Fasteners

ASTM-A370
Test Methods and Definitions for Mechanical Testing of Steel Products

ASTM-A394
Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare

ASTM-A449
Specification for Quenched and Tempered Steel Bolts and Studs

ASTM-F467
Specification for Nonferrous Nuts for General Use

ASTM-F468
Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws and Studs for General Use

ASTM-A489
Specification for Carbon Steel Lifting Eyes

ASTM-A490
(Changed to ASTM F3125) - Specification for Heat-Treated Structural Bolts, 150 KSI Tensile Strength

ASTM-A502
Specification for Rivets, Steel Structural

ASTM-A563
Specification for Carbon and Alloy Steel Nuts

ASTM-A574
Specification for Alloy Steel Socket Cap Screws

ASTM-B633
Specification for Electrodeposited Coatings of Zinc on Iron and Steel

ASTM-B695
Specification for Coatings of Zinc Mechanically Deposited on Iron or Steel

ASTM-F432
Specification for Roof and Rock Bolts and Accessories

ASTM-F436
Specification for Hardened Steel Washers, Inch and Metric

ASTM-F467
Specification for Nonferrous Nuts for General Use

ASTM-F468
Specification for Nonferrous Bolts, Hex Cap Screws and Studs for General Use

ASTM-F541
Specification for Alloy Steel Eyebolts

ASTM-F547
Standard Terminology of Nails for Use with Wood and Wood-Base Materials

ASTM-F593
Specification for Stainless Steel Bolts, Hex Cap Screws and Studs

ASTM-F594
Specification for Stainless Steel Nuts

ASTM-F606
Test Methods for Determining Mechanical Properties of Externally and Internally Threaded Fasteners, Washers and Rivets

ASTM-F680
Standard Test Methods for Nails

ASTM-F788
Specification for Surface Discontinuities of Bolts, Screws and Studs, Inch and Metric

ASTM-F812
Specification for Surface Discontinuities of Nuts, Inch and Metric

ASTM-F835
Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws

ASTM-F837
Specification for Stainless Steel Socket Head Cap Screws

ASTM-F844
Specification for Washers, Steel Plain (Flat), Unhardened for General Use

ASTM-F879
Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws

ASTM-F880
Specification for Stainless Steel Socket Set Screws

ASTM-F901
Specification for Aluminum Transmission Tower Bolts and Nuts

ASTM-F912
Specification for Alloy Steel Socket Set Screws

ASTM-F959
Specification for Compression-Washer-Type Direct Tension Indicators (DTI) for Use with Structural Fasteners

ASTM-F1136
Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners

ASTM-F1137
Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners

ASTM-F1428
Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners

ASTM-F1469
Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing

ASTM-F1470
Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection

ASTM-F1503
Standard Practice for Machine/Process Capability Study Procedure

ASTM-F1554
Specification for Anchor Bolts, Steel, 36, 55 and 105 KDI Yield Strength

ASTM-F1575
Standard Test Method for Determining Bending Yield Moment of Nails

ASTM-F1667
Specification of Driven Fasteners: Nails, Spikes and Staples

ASTM-F1789
Standard Terminology for F16 Mechanical Fasteners

ASTM-F1852
(Changed to ASTM F3125) - Specification for "Twist-Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 KSI Minimum Tensile Strength

ASTM-F1940
Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners

ASTM-F1941
Specification for Electrodeposited Coatings on Thread Fasteners, Inch and Metric

ASTM-F2281
Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws and Studs for Heat Resistant and High Temperature Applications

ASTM-F2282
Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods and Bars for Mechanical Fasteners

ASTM-F2328
Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs and Nuts

ASTM-F2329
Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts and Special Threaded Fasteners

ASTM-F2437
Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators (DTI) for Use with Hex Cap Screws, Bolts, Anchors and Studs

ASTM-F2482
Specification for Load-Indicating Externally Threaded Fasteners

ASTM-F2660
Standard Test Method for Qualifying Coatings for Use on A490 Structural Bolts Relative to Environmental Hydrogen Embrittlement

ASTM-F2688
Standard Guide for System-Based, Customer-Centered Quality Plan for Manufacturers

ASTM-F2329
Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts and Special Threaded Fasteners

ASTM-F2832
Standard Guide for Accelerated Corrosion Testing for Mechanical Fasteners

ASTM-F2833
Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type

ASTM-F2882
Specification for Screws, Alloy Steel, Heat Treated, 170 KSI and 1170 MPa Minimum Tensile Strength, Inch and Metric

ASTM-F3019
Specification for Chromium Free Zinc-Flake Composite, with or without Integral Lubricant, Corrosion Protective Coatings for Fasteners

ASTM-F3042
Specification for Nonferrous Hex Socket, Slotted Headless and Square Head Set Screws

ASTM-F3043
Specification for "Twist-Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 KSI Minimum Tensile Strength

ASTM-F3111
Specification for Heavy Hex Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 KSI Minimum Tensile Strength

ASTM-F3125
Specification for High Strength Structural Bolts, Steel and Alloy Steel, Heat Treated 120 KSI (830 MPa) and 150 KSI (1040 MPa) Minimum Tensile Strength, Inch and Metric

ASTM-F3148
Specification for High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144 KSI Minimum Tensile Strength, Inch Dimensions

SAE-J58
Flanged 12-Point Screws

SAE-J78
Steel Self-Drilling Screws

SAE-J81
Thread Rolling Screws

SAE-J82
Mechanical and Quality Requirements for Machine Screws

SAE-J121
Decarburization in Hardened and Tempered Unified Threaded Fasteners

SAE-J122
Surface Discontinuities on Nuts

SAE-J123
Surface Discontinuities on Bolts, Screws and Studs in Fatigue Applications

SAE-J174
Torque-Tension Test Procedure for Steel Threaded Fasteners - Inch Series

SAE-J238
Nut and Conical Spring Washer Assemblies

SAE-J429
Mechanical and Material Requirements for Externally Threaded Fasteners

SAE-J430
Mechanical and Chemical Requirements for Non-threaded Fasteners, Carbon Steel Solid Rivets

SAE-J482
Hexagon High Nuts

SAE-J483
Crown (Blind, Acorn) Nuts

SAE-J485
Holes in Bolt and Screw Shanks and Slots in Nuts for Cotter Pins

SAE-J492
Rivets and Riveting

SAE-J493
Rod Ends and Clevis Pins

SAE-J773
Conical Spring Washers

SAE-J891
Spring Nuts

SAE-J892
Push-On Spring Nuts, Inch Series- General Specifications

SAE-J933
Mechanical and Quality Requirements for Tapping Screws

SAE-J995
Mechanical and Material Requirements for Steel Nuts

SAE-J1053
Steel Stamped Nuts on One Pitch Thread Design, Inch Series

SAE-J1061
Surface Discontinuities on General Application Bolts, Screws and Studs

SAE-J1102
Mechanical and Material Requirements for Wheel Bolts

SAE-J1199
Mechanical and Material Requirements for Metric Externally Threaded Steel Fasteners

SAE-J1200
Blind Rivets - Break Mandrel Type

SAE-J1237
Metric Thread Rolling Screws

SAE-J1648
Protective Coatings for Fasteners

SAE-J1701
Torque-Tension Tightening for Inch Series Fasteners

SAE-J2486
Tension Indicating Washer Tightening Method for Fasteners

ANSI-B1.1
Unified Inch Screw Threads (UN and UNR) Thread Form

ANSI-B1.12
Class 5 Interference-Fit Thread

ANSI-B1.15
Unified Inch Screw Threads (UNJ) Thread Form

ANSI-B18.1.1
Small Solid Rivet

ANSI-B18.1.2
Large Rivets

ANSI-B18.2.1
Square and Hex Bolts and Screws

ANSI-B18.2.2
Square and Hex Nuts

ANSI-B18.2.6
Fasteners for Use in Structural Applications

ANSI-B18.3
Socket Cap, Shoulder and Set Screws

ANSI-B18.5
Round Head Bolts

ANSI-B18.6.1
Wood Screws

ANSI-B18.6.2
Slotted Head Cap Screws, Square Head Set Screws and Slotted Headless Set Screws

ANSI-B18.6.3
Machine Screws and Machine Screw Nuts

ANSI-B18.6.4
Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws

ANSI-B18.7
General Purpose Semi-Tubular Rivets, Split Rivets and Rivet Caps

ANSI-B18.8.1
Clevis Pins and Cotter Pins

ANSI-B18.8.2
Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins

ANSI-B18.9
Plow Bolts

ANSI-B18.10
Track Bolts and Nuts

ANSI-B18.11
Miniature Screws

ANSI-B18.13
Screw and Washer Assemblies (Sems)

ANSI-B18.15
Forged Eyebolts

ANSI-B18.17
Wing Nuts, Thumb Screws and Wing Screws

ANSI-B18.21.1
Lock Washers

ANSI-B18.22.1
Plain Washers

ANSI-B18.23.1
Beveled Washers

WorldwideFastenerSources.com, LLC

555 Lesesne Street
Daniel Island, SC 29492
(602) 793-2383
EMAIL

Copyright © 2024 WorldwideFastenerSources.com, LLC --
All Rights Reserved.

Marquis Badge
Top 100 Badge
Parts Base Premiere Member