The Right Source

Register: Suppliers | Distributors
Login: Suppliers | Distributors
The Right Source

Fastener Resources

Fastener Standards

Fastener Standards come to play every day in the fastener industry without exception. Standards provide information to establish quality fasteners, dimensional standards and testing for performance of the fastener and in the fastening applications. We have represented the three major fastener standards organizations in the United States with ASTM, SAE and ANSI. Further questions and comments should be directed towards the Standards Organization and request a copy of the standard you are concerned.

ASTM-A31
Specification for Steel Rivets and Bars for Rivets, Pressure Vessels
ASTM-A36
Specification for Carbon Structural Steel A-153 Specification for Zinc Coating (Hot-Dip) on Iron and steel Hardware
ASTM-A193
Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service
ASTM-A194
Specification for Carbon and Alloy Steel Nut for Bolts for High-Pressure and High-Temperature Service
ASTM-A307
Specification for Steel Bolts and Studs, 60,000 PSI Tensile Strength
ASTM-A320
Specification for Alloy Steel Bolting Materials for Low-Temperature Service
ASTM-A325
Specification for Structural Bolts, Steel, Heat Treated, 120/105 KSI Minimum Tensile Strength
ASTM-A354
Specification for Quenched and Tempered Alloy Steel Bolts, Studs and Other Externally Threaded Fasteners
ASTM-A370
Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM-A394
Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
ASTM-A449
Specification for Quenched and Tempered Steel Bolts and Studs
ASTM-F467
Specification for Nonferrous Nuts for General Use
ASTM-F468
Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws and Studs for General Use
ASTM-A489
Specification for Carbon Steel Lifting Eyes
ASTM-A490
Specification for Heat-Treated Structural Bolts, 150 KSI Tensile Strength
ASTM-A502
Specification for Rivets, Steel Structural
ASTM-A563
Specification for Carbon and Alloy Steel Nuts
ASTM-A574
Specification for Alloy Steel Socket Cap Screws
ASTM-B633
Specification for Electrodeposited Coatings of Zinc on Iron and Steel
ASTM-B695
Specification for Coatings of Zinc Mechanically Deposited on Iron or Steel
ASTM-F432
Specification for Roof and Rock Bolts and Accessories
ASTM-F436
Specification for Hardened Steel Washers, Inch and Metric
ASTM-F467
Specification for Nonferrous Nuts for General Use
ASTM-F468
Specification for Nonferrous Bolts, Hex Cap Screws and Studs for General Use
ASTM-F541
Specification for Alloy Steel Eyebolts
ASTM-F547
Standard Terminology of Nails for Use with Wood and Wood-Base Materials
ASTM-F593
Specification for Stainless Steel Bolts, Hex Cap Screws and Studs
ASTM-F594
Specification for Stainless Steel Nuts
ASTM-F606
Test Methods for Determining Mechanical Properties of Externally and Internally Threaded Fasteners, Washers and Rivets
ASTM-F680
Standard Test Methods for Nails
ASTM-F788
Specification for Surface Discontinuities of Bolts, Screws and Studs, Inch and Metric
ASTM-F812
Specification for Surface Discontinuities of Nuts, Inch and Metric
ASTM-F835
Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
ASTM-F837
Specification for Stainless Steel Socket Head Cap Screws
ASTM-F844
Specification for Washers, Steel Plain (Flat), Unhardened for General Use
ASTM-F879
Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws
ASTM-F880
Specification for Stainless Steel Socket Set Screws
ASTM-F901
Specification for Aluminum Transmission Tower Bolts and Nuts
ASTM-F912
Specification for Alloy Steel Socket Set Screws
ASTM-F959
Specification for Compression-Washer-Type Direct Tension Indicators (DTI) for Use with Structural Fasteners
ASTM-F1136
Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners
ASTM-F1137
Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners
ASTM-F1428
Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners
ASTM-F1469
Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing
ASTM-F1470
Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM-F1503
Standard Practice for Machine/Process Capability Study Procedure
ASTM-F1554
Specification for Anchor Bolts, Steel, 36, 55 and 105 KDI Yield Strength
ASTM-F1575
Standard Test Method for Determining Bending Yield Moment of Nails
ASTM-F1667
Specification of Driven Fasteners: Nails, Spikes and Staples
ASTM-F1789
Standard Terminology for F16 Mechanical Fasteners
ASTM-F1852
Specification for "Twist-Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 KSI Minimum Tensile Strength
ASTM-F1940
Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
ASTM-F1941
Specification for Electrodeposited Coatings on Thread Fasteners, Inch and Metric
ASTM-F2281
Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws and Studs for Heat Resistant and High Temperature Applications
ASTM-F2282
Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods and Bars for Mechanical Fasteners
ASTM-F2328
Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs and Nuts
ASTM-F2329
Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts and Special Threaded Fasteners
ASTM-F2437
Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators (DTI) for Use with Hex Cap Screws, Bolts, Anchors and Studs
ASTM-F2482
Specification for Load-Indicating Externally Threaded Fasteners
ASTM-F2660
Standard Test Method for Qualifying Coatings for Use on A490 Structural Bolts Relative to Environmental Hydrogen Embrittlement
ASTM-F2688
Standard Guide for System-Based, Customer-Centered Quality Plan for Manufacturers
ASTM-F2329
Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts and Special Threaded Fasteners
ASTM-F2832
Standard Guide for Accelerated Corrosion Testing for Mechanical Fasteners
ASTM-F2833
Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type
ASTM-F2882
Specification for Screws, Alloy Steel, Heat Treated, 170 KSI and 1170 MPa Minimum Tensile Strength, Inch and Metric
ASTM-F3019
Specification for Chromium Free Zinc-Flake Composite, with or without Integral Lubricant, Corrosion Protective Coatings for Fasteners
ASTM-F3042
Specification for Nonferrous Hex Socket, Slotted Headless and Square Head Set Screws
ASTM-F3043
Specification for "Twist-Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 KSI Minimum Tensile Strength
ASTM-F3111
Specification for Heavy Hex Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 KSI Minimum Tensile Strength
ASTM-F3125
Specification for High Strength Structural Bolts, Steel and Alloy Steel, Heat Treated 120 KSI (830 MPa) and 150 KSI (1040 MPa) Minimum Tensile Strength, Inch and Metric
ASTM-F3148
Specification for High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144 KSI Minimum Tensile Strength, Inch Dimensions
SAE-J58
Flanged 12-Point Screws
SAE-J78
Steel Self-Drilling Screws
SAE-J81
Thread Rolling Screws
SAE-J82
Mechanical and Quality Requirements for Machine Screws
SAE-J121
Decarburization in Hardened and Tempered Unified Threaded Fasteners
SAE-J122
Surface Discontinuities on Nuts
SAE-J123
Surface Discontinuities on Bolts, Screws and Studs in Fatigue Applications
SAE-J174
Torque-Tension Test Procedure for Steel Threaded Fasteners - Inch Series
SAE-J238
Nut and Conical Spring Washer Assemblies
SAE-J429
Mechanical and Material Requirements for Externally Threaded Fasteners
SAE-J430
Mechanical and Chemical Requirements for Non-threaded Fasteners, Carbon Steel Solid Rivets
SAE-J482
Hexagon High Nuts
SAE-J483
Crown (Blind, Acorn) Nuts
SAE-J485
Holes in Bolt and Screw Shanks and Slots in Nuts for Cotter Pins
SAE-J492
Rivets and Riveting
SAE-J493
Rod Ends and Clevis Pins
SAE-J773
Conical Spring Washers
SAE-J891
Spring Nuts
SAE-J892
Push-On Spring Nuts, Inch Series- General Specifications
SAE-J933
Mechanical and Quality Requirements for Tapping Screws
SAE-J995
Mechanical and Material Requirements for Steel Nuts
SAE-J1053
Steel Stamped Nuts on One Pitch Thread Design, Inch Series
SAE-J1061
Surface Discontinuities on General Application Bolts, Screws and Studs
SAE-J1102
Mechanical and Material Requirements for Wheel Bolts
SAE-J1199
Mechanical and Material Requirements for Metric Externally Threaded Steel Fasteners
SAE-J1200
Blind Rivets - Break Mandrel Type
SAE-J1237
Metric Thread Rolling Screws
SAE-J1648
Protective Coatings for Fasteners
SAE-J1701
Torque-Tension Tightening for Inch Series Fasteners
SAE-J2486
Tension Indicating Washer Tightening Method for Fasteners
ANSI-B1.1
Unified Inch Screw Threads (UN and UNR) Thread Form
ANSI-B1.12
Class 5 Interference-Fit Thread
ANSI-B1.15
Unified Inch Screw Threads (UNJ) Thread Form
ANSI-B18.1.1
Small Solid Rivet
ANSI-B18.1.2
Large Rivets
ANSI-B18.2.1
Square and Hex Bolts and Screws
ANSI-B18.2.2
Square and Hex Nuts
ANSI-B18.2.6
Fasteners for Use in Structural Applications
ANSI-B18.3
Socket Cap, Shoulder and Set Screws
ANSI-B18.5
Round Head Bolts
ANSI-B18.6.1
Wood Screws
ANSI-B18.6.2
Slotted Head Cap Screws, Square Head Set Screws and Slotted Headless Set Screws
ANSI-B18.6.3
Machine Screws and Machine Screw Nuts
ANSI-B18.6.4
Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws
ANSI-B18.7
General Purpose Semi-Tubular Rivets, Split Rivets and Rivet Caps
ANSI-B18.8.1
Clevis Pins and Cotter Pins
ANSI-B18.8.2
Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins
ANSI-B18.9
Plow Bolts
ANSI-B18.10
Track Bolts and Nuts
ANSI-B18.11
Miniature Screws
ANSI-B18.13
Screw and Washer Assemblies (Sems)
ANSI-B18.15
Forged Eyebolts
ANSI-B18.17
Wing Nuts, Thumb Screws and Wing Screws
ANSI-B18.21.1
Lock Washers
ANSI-B18.22.1
Plain Washers
ANSI-B18.23.1
Beveled Washers

Fastener Resources

Fastener Standards

Fastener Standards come to play every day in the fastener industry without exception. Standards provide information to establish quality fasteners, dimensional standards and testing for performance of the fastener and in the fastening applications. We have represented the three major fastener standards organizations in the United States with ASTM, SAE and ANSI. Further questions and comments should be directed towards the Standards Organization and request a copy of the standard you are concerned.

ASTM-A31
Specification for Steel Rivets and Bars for Rivets, Pressure Vessels
ASTM-A36
Specification for Carbon Structural Steel A-153 Specification for Zinc Coating (Hot-Dip) on Iron and steel Hardware
ASTM-A193
Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service
ASTM-A194
Specification for Carbon and Alloy Steel Nut for Bolts for High-Pressure and High-Temperature Service
ASTM-A307
Specification for Steel Bolts and Studs, 60,000 PSI Tensile Strength
ASTM-A320
Specification for Alloy Steel Bolting Materials for Low-Temperature Service
ASTM-A325
Specification for Structural Bolts, Steel, Heat Treated, 120/105 KSI Minimum Tensile Strength
ASTM-A354
Specification for Quenched and Tempered Alloy Steel Bolts, Studs and Other Externally Threaded Fasteners
ASTM-A370
Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM-A394
Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
ASTM-A449
Specification for Quenched and Tempered Steel Bolts and Studs
ASTM-F467
Specification for Nonferrous Nuts for General Use
ASTM-F468
Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws and Studs for General Use
ASTM-A489
Specification for Carbon Steel Lifting Eyes
ASTM-A490
Specification for Heat-Treated Structural Bolts, 150 KSI Tensile Strength
ASTM-A502
Specification for Rivets, Steel Structural
ASTM-A563
Specification for Carbon and Alloy Steel Nuts
ASTM-A574
Specification for Alloy Steel Socket Cap Screws
ASTM-B633
Specification for Electrodeposited Coatings of Zinc on Iron and Steel
ASTM-B695
Specification for Coatings of Zinc Mechanically Deposited on Iron or Steel
ASTM-F432
Specification for Roof and Rock Bolts and Accessories
ASTM-F436
Specification for Hardened Steel Washers, Inch and Metric
ASTM-F467
Specification for Nonferrous Nuts for General Use
ASTM-F468
Specification for Nonferrous Bolts, Hex Cap Screws and Studs for General Use
ASTM-F541
Specification for Alloy Steel Eyebolts
ASTM-F547
Standard Terminology of Nails for Use with Wood and Wood-Base Materials
ASTM-F593
Specification for Stainless Steel Bolts, Hex Cap Screws and Studs
ASTM-F594
Specification for Stainless Steel Nuts
ASTM-F606
Test Methods for Determining Mechanical Properties of Externally and Internally Threaded Fasteners, Washers and Rivets
ASTM-F680
Standard Test Methods for Nails
ASTM-F788
Specification for Surface Discontinuities of Bolts, Screws and Studs, Inch and Metric
ASTM-F812
Specification for Surface Discontinuities of Nuts, Inch and Metric
ASTM-F835
Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
ASTM-F837
Specification for Stainless Steel Socket Head Cap Screws
ASTM-F844
Specification for Washers, Steel Plain (Flat), Unhardened for General Use
ASTM-F879
Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws
ASTM-F880
Specification for Stainless Steel Socket Set Screws
ASTM-F901
Specification for Aluminum Transmission Tower Bolts and Nuts
ASTM-F912
Specification for Alloy Steel Socket Set Screws
ASTM-F959
Specification for Compression-Washer-Type Direct Tension Indicators (DTI) for Use with Structural Fasteners
ASTM-F1136
Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners
ASTM-F1137
Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners
ASTM-F1428
Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners
ASTM-F1469
Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing
ASTM-F1470
Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM-F1503
Standard Practice for Machine/Process Capability Study Procedure
ASTM-F1554
Specification for Anchor Bolts, Steel, 36, 55 and 105 KDI Yield Strength
ASTM-F1575
Standard Test Method for Determining Bending Yield Moment of Nails
ASTM-F1667
Specification of Driven Fasteners: Nails, Spikes and Staples
ASTM-F1789
Standard Terminology for F16 Mechanical Fasteners
ASTM-F1852
Specification for "Twist-Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 KSI Minimum Tensile Strength
ASTM-F1940
Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
ASTM-F1941
Specification for Electrodeposited Coatings on Thread Fasteners, Inch and Metric
ASTM-F2281
Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws and Studs for Heat Resistant and High Temperature Applications
ASTM-F2282
Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods and Bars for Mechanical Fasteners
ASTM-F2328
Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs and Nuts
ASTM-F2329
Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts and Special Threaded Fasteners
ASTM-F2437
Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators (DTI) for Use with Hex Cap Screws, Bolts, Anchors and Studs
ASTM-F2482
Specification for Load-Indicating Externally Threaded Fasteners
ASTM-F2660
Standard Test Method for Qualifying Coatings for Use on A490 Structural Bolts Relative to Environmental Hydrogen Embrittlement
ASTM-F2688
Standard Guide for System-Based, Customer-Centered Quality Plan for Manufacturers
ASTM-F2329
Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts and Special Threaded Fasteners
ASTM-F2832
Standard Guide for Accelerated Corrosion Testing for Mechanical Fasteners
ASTM-F2833
Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type
ASTM-F2882
Specification for Screws, Alloy Steel, Heat Treated, 170 KSI and 1170 MPa Minimum Tensile Strength, Inch and Metric
ASTM-F3019
Specification for Chromium Free Zinc-Flake Composite, with or without Integral Lubricant, Corrosion Protective Coatings for Fasteners
ASTM-F3042
Specification for Nonferrous Hex Socket, Slotted Headless and Square Head Set Screws
ASTM-F3043
Specification for "Twist-Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 KSI Minimum Tensile Strength
ASTM-F3111
Specification for Heavy Hex Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 KSI Minimum Tensile Strength
ASTM-F3125
Specification for High Strength Structural Bolts, Steel and Alloy Steel, Heat Treated 120 KSI (830 MPa) and 150 KSI (1040 MPa) Minimum Tensile Strength, Inch and Metric
ASTM-F3148
Specification for High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144 KSI Minimum Tensile Strength, Inch Dimensions
SAE-J58
Flanged 12-Point Screws
SAE-J78
Steel Self-Drilling Screws
SAE-J81
Thread Rolling Screws
SAE-J82
Mechanical and Quality Requirements for Machine Screws
SAE-J121
Decarburization in Hardened and Tempered Unified Threaded Fasteners
SAE-J122
Surface Discontinuities on Nuts
SAE-J123
Surface Discontinuities on Bolts, Screws and Studs in Fatigue Applications
SAE-J174
Torque-Tension Test Procedure for Steel Threaded Fasteners - Inch Series
SAE-J238
Nut and Conical Spring Washer Assemblies
SAE-J429
Mechanical and Material Requirements for Externally Threaded Fasteners
SAE-J430
Mechanical and Chemical Requirements for Non-threaded Fasteners, Carbon Steel Solid Rivets
SAE-J482
Hexagon High Nuts
SAE-J483
Crown (Blind, Acorn) Nuts
SAE-J485
Holes in Bolt and Screw Shanks and Slots in Nuts for Cotter Pins
SAE-J492
Rivets and Riveting
SAE-J493
Rod Ends and Clevis Pins
SAE-J773
Conical Spring Washers
SAE-J891
Spring Nuts
SAE-J892
Push-On Spring Nuts, Inch Series- General Specifications
SAE-J933
Mechanical and Quality Requirements for Tapping Screws
SAE-J995
Mechanical and Material Requirements for Steel Nuts
SAE-J1053
Steel Stamped Nuts on One Pitch Thread Design, Inch Series
SAE-J1061
Surface Discontinuities on General Application Bolts, Screws and Studs
SAE-J1102
Mechanical and Material Requirements for Wheel Bolts
SAE-J1199
Mechanical and Material Requirements for Metric Externally Threaded Steel Fasteners
SAE-J1200
Blind Rivets - Break Mandrel Type
SAE-J1237
Metric Thread Rolling Screws
SAE-J1648
Protective Coatings for Fasteners
SAE-J1701
Torque-Tension Tightening for Inch Series Fasteners
SAE-J2486
Tension Indicating Washer Tightening Method for Fasteners
ANSI-B1.1
Unified Inch Screw Threads (UN and UNR) Thread Form
ANSI-B1.12
Class 5 Interference-Fit Thread
ANSI-B1.15
Unified Inch Screw Threads (UNJ) Thread Form
ANSI-B18.1.1
Small Solid Rivet
ANSI-B18.1.2
Large Rivets
ANSI-B18.2.1
Square and Hex Bolts and Screws
ANSI-B18.2.2
Square and Hex Nuts
ANSI-B18.2.6
Fasteners for Use in Structural Applications
ANSI-B18.3
Socket Cap, Shoulder and Set Screws
ANSI-B18.5
Round Head Bolts
ANSI-B18.6.1
Wood Screws
ANSI-B18.6.2
Slotted Head Cap Screws, Square Head Set Screws and Slotted Headless Set Screws
ANSI-B18.6.3
Machine Screws and Machine Screw Nuts
ANSI-B18.6.4
Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws
ANSI-B18.7
General Purpose Semi-Tubular Rivets, Split Rivets and Rivet Caps
ANSI-B18.8.1
Clevis Pins and Cotter Pins
ANSI-B18.8.2
Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins
ANSI-B18.9
Plow Bolts
ANSI-B18.10
Track Bolts and Nuts
ANSI-B18.11
Miniature Screws
ANSI-B18.13
Screw and Washer Assemblies (Sems)
ANSI-B18.15
Forged Eyebolts
ANSI-B18.17
Wing Nuts, Thumb Screws and Wing Screws
ANSI-B18.21.1
Lock Washers
ANSI-B18.22.1
Plain Washers
ANSI-B18.23.1
Beveled Washers

Supplier

Registration

Log-In

Distributor

Registration

Log-In



WorldwideFastenerSources.com, LLC

11305 E. Monument Dr.
Scottsdale, AZ 85262-4746
(602) 793-2383
EMAIL